Home > Facility & Worksite > Fall Protection > Self Retracting Lifelines > Roto-Loc® Leading Edge Series > Roto-Loc® Leading Edge SRL-LE with Rebar Hook

Roto-Loc® Leading Edge SRL-LE with Rebar Hook

Connector sold separately

Part Number: REL4486006-1

Out of Stock

Tying off overhead is always the best decision you can possibly make when it comes to fall arrest. Sometimes that isn’t possible, and in those circumstances you may have to select an anchorage with a lower elevation or even tie-off at the foot-level. The Roto-Loc® SRL-LE is designed for those circumstances. It features a unique mechanically activated rotary locking mechanism that ensures a rapid and secure locking engagement, no matter what. It also features an internal rotary brake, which is more efficient than textile energy absorbers commonly used on devices of this type. The 48” reserve line ensures that the device has plenty of reserve energy capacity.

These features work together to not only make the device safer and more reliable, but also provide the best performance possible and only require 12 feet of clearance for a perpendicular approach (Lateral offsets will increase fall distance) in leading-edge falls! We also use a mil-spec wire rope of higher strength to ensure greater factors of safety.

Tying off at the feet while exposed to a leading or unprotected edge should only be done as a last resort. However, if that’s the hand you’ve been dealt then Roto-Loc is like having an ace up your sleeve!

CLICK HERE for the data sheet on the Roto-Loc® Leading Edge SRL-LE.

Do you have questions and need information? Contact goSafe customer service for ansewers.

Your Price
$298.71 EA
EA
Add to Cart

Brand Reliance Fall Protection
Weight 5.6 lbs
Working Length 6’ (1.8m)
Cable Type 3/16” (4.5mm) Galvanized
Hook Type 3011WR Rebar ZN Plate
Prop 65 Disclaimer Warning. Cancer and Reproductive Harm. www.P65Warnings.ca.gov

  • Internal rotary brake
  • FailSafe locking mechanism
  • 48” reserve line
  • 3/16”, 7 x 19 Mil Spec wire rope
  • Available in single and twin configurations
  • Rugged housing with protective overmold
  • Only 12 ft required clearance (perpendicular approach)
  • Housing Type: Sanoprene over ABS
  • Housing Dimensions: 8”L x 5”W x 3.5”H (20.3cm x 12.7cm x 88.9cm)